Plumbing Tips and Tricks: Plumbing Basics and Maintenance

For the people who are new to plumbing, there are some smart tips they should know. What are smart plumbing tips? The ones that are worth knowing; simple! To start, briefly understand piping material because knowing your apparatus is important before you start the job. Every kind of pipe has its own specific use. The most typical piping materials used are flexible copper, ABS (acrylonitrile butadiene styrene), rigid plastic PVC, galvanized steel, PEX (Crosslink polyethylene, and rigid copper. Rigid copper is a very common material used in water lines. However, rigid copper material cannot bend and that is why, all the joint parts must be soldered onto it.

Plumbing Basics: Soldering Tips
Soldering is a difficult job which cannot be executed by everyone, especially those who are new to plumbing. It is not unusual for soldering to don’t succeed to get the external area of the pipe as well as the fitting interior as clean as possible. To achieve this, the plumber should think about polishing both the surfaces using an emery cloth. One should keep on polishing until a shiny look appear to the pipe as well as the fitting. After soldering, the fitting should be heated instead of the pipe.

Common Food Plumbing Trick
Another plumbing tips incorporate food found in the kitchen area. When doing the task of soldering, if the water line shows a minor drip, you should take a small piece of white bread and roll it properly into the tightest ball. The ball of white bread, then should be put inside the pipe where the drip is formed; this will block the drip and absorb the water. Don’t worry, after the completion of the task, when water is turned on, the ball will wash down the drain. So a common food can also be a plumbing trick.Dévisser un robinet

Leaky Inline Faucet
Plumbing tips also include a leaky inline faucet. Don’t assume the difficulty level before starting it. Tight the nut below the hand wheel as this may be the cause of the leak. So don’t assume anything; just perform a basic tricks and see if the problem get solved.

Bottom Line
It is suggested to seek advice from a plumbing professional or from the person who is more familiar with plumbing issues; it never hurts to look for guidance from a professional plumber. According to a famous quote; you learn from your mistake. Therefore, don’t worry if you are new to this field; mistakes will happen and you will be able to learn from them. To be the best plumbing professions one should note down above mentioned tips and put those in good use.

Pros and Cons Of Copper Pipes

Copper pipes have been commonly used in plumbing for many years. However, galvanized steel pipes were used for long before, until later copper pipes surpassed them. Nowadays, copper pipes are facing stiff competition from plastic pipes such as PVC, PEX, and CPVC, though they still remain a most popular choice. As much as copper pipes have various advantages, so too are the disadvantages. We shall look at both pros and cons of copper as a plumbing material.

Pros

• Copper pipes are very durable, with ability to resist breakage. It is stable enough to withstand high pressure and impact, making it suitable for underground or surface piping. Due to its high melting point, it can resist damage from fire or high solar temperatures if installed above the ground surface.

• Copper pipes are naturally resistant to bacteria growth, which usually grow in some other water pipes. These bacteria are responsible for making water unclean for domestic and commercial use.

• Copper pipes can be re-used, unlike plastic pipes which once broken cannot be used for other purposes.

• Copper metal resists corrosion naturally. Unlike galvanized steel pipes, copper pipes will not leak or break due to corrosion.

• Copper is lightweight, making it easier to install. In addition, copper is lead-free and less expensive compared to steel.

• Manufacturing process of copper pipes involves naturally occurring metal and don’t emit harmful gases into the environment compared to synthetic plastic pipes.

Cons

bigstock-Plumbing-tool-pipes-and-fittin-19162544

• For a cheaper piping system, plastic pipes are the best choice compared to copper pipes. Galvanized steel pipes and copper pipes are more expensive to buy and install than CPVC and PEX plastic pipes.

• Copper pipes are not suitable for acidic water since they react with the acid leading to poor water quality, with a metallic taste.

• Although copper pipes are somehow flexible, plastic pipes are more flexible and able to fit into smaller spaces.

• Plastic pipes come with color codes, which make it easier for homeowners to decide pipes for cold and hot water.
The choice of your piping material can depend on cost, durability, as well as the level of local water hardness among other factors. However, cost of buying and installing copper pipes is more than that of plastic pipes. So, according to the advantages and disadvantages outlined above, you can make an informed decision based on your piping needs.